Hey, I'm Brian Hebert from Leisure Travel Vans,
and today we're gonna be talking about the RVC connections
and how the Firefly uses that to communicate
with the different devices in the coach, such
as the transfer switch, the water heater,
and other devices inside the coach.
So one of the things we can look at here is this is our
Firefly LCD screen.
In order to remove this screen,
we're gonna be pushing down on the screen and pulling out.
So you're gonna push down and pull it out,
and as you pull it out, it'll unclip
and it does, it does pull out quite hard at times too.
So just be aware of that. So the Firefly system, it works
by communicating through what's called an RVC cable.
So these are the RVC cables, which you'll see here.
So this orange cable will go back
to the what's called the G 12 module.
And the G 12 module is like the brains
of the Firefly system,
but notably inside here, behind the LCD panel,
you're gonna notice that there's gonna be what's called the
Vega Touch Mirror Bluetooth module.
That's what's sending out the
Bluetooth signal to your phone.
So if you ever have issues with the Bluetooth on your phone,
you may need to reset this device.
In order to reset that, there is a small button
that you need to push in.
You might need a paper clip or something
or a toothpick just to push that button in.
Hold that button in for maybe five or 10 seconds
and that will reset the module.
Once you've reset the module back on your LCD screen,
that's when you're gonna be going back into the mobile app
screen and you'll see that the mirror pin will have changed.
So you'll have to re-log back in using the correct pin
number 'cause that'll reset it back to the factory settings.
Another thing you're gonna see back here,
the dragonfly hub is the Bluetooth module
that communicates with the battery.
So that's what it's gonna be
telling you, the state of charge.
So when you log in using your Bluetooth on your phone,
you're gonna be logging into your battle born app.
Once you log into the battle borne app,
it'll be logging into this dragonfly hub inside here,
and it's gonna be communicating with your phone
to tell you the state of charge of your batteries.
So connecting to the battle borne hub, you'll see
that there is a power supply right here.
This is a power supply that plugs into the USBC outlet on
the Dragonfly Hub, and it's just powered by 12 volt power.
So on the back of the Firefly screen,
you're also gonna notice that there's a USB port right here.
That USB port is actually there
for updating the firmware on the LCD panel
and the overall firefly system.
So if ever you do need to do an update,
this is the the USB port that you're gonna be using
to update the G 12 and the Firefly system.
So when you are doing the update,
what you would do is you just unplug this RVC cable.
You'll notice that to unplug the RVC cable,
there's a little tab right here.
You're gonna push that tab, pull that apart.
Now what you would do is you would plug your USB stick into
there with the new firmware.
Once you have that plugged in,
then you'll just plug the RVC cable back in.
You'll just hear clip in place,
and then you'll go through the settings on the screen.
It'll tell you exactly what needs to be updated.
You just make sure you update every file
that shows that it needs to be updated.
Once you're done, you'll just disconnect the
USB stick and it'll reset.
You'll have the new firmware loaded up
to find the firmware on your
LCD panel if you do need to see it.
And typically, if you do call in for service, that's one
of the things that we will ask if you're having issues.
So we're just gonna go over to the setting screen.
And from the setting screen,
you'll see at the bottom it's the GOI version
and the CLC version
or some other ones will say the logic controller version.
So just take a look at those two. These are both 6.6.
They should both always be the same.
So this is something that we're gonna ask for if you call in
for service or if you call into Firefly for service.
So you'll notice that in some
of the systems you're gonna find a G four Common Tap.
It's basically an RVC splitter is what this is.
So what you have here is you'll see that there,
the Mira module is plugged into this G four common tap,
as well as this line here is gonna be going
to the G 12 module, the brains of the Firefly system.
And in this case here, there's also a a line bridge which
comes from the, in this coach,