Transcript 00:00:13 - 00:00:18 - Aller à la vidéo↑ So Ryan, can we talk a little bit about
00:00:15 - 00:00:19 - Aller à la vidéo↑ the settings screen now?
00:00:17 - 00:00:22 - Aller à la vidéo↑ Sure. So to get to the settings, you go
00:00:18 - 00:00:24 - Aller à la vidéo↑ to this little gear icon here. So you
00:00:21 - 00:00:26 - Aller à la vidéo↑ head into there. So there's a number of
00:00:23 - 00:00:27 - Aller à la vidéo↑ different settings here. So the first
00:00:25 - 00:00:29 - Aller à la vidéo↑ button we'll talk about is cleaning
00:00:26 - 00:00:31 - Aller à la vidéo↑ mode. So, say you get a lot of finger
00:00:28 - 00:00:33 - Aller à la vidéo↑ fingerprints on your screen, you press
00:00:30 - 00:00:35 - Aller à la vidéo↑ this cleaning mode button and it will
00:00:32 - 00:00:36 - Aller à la vidéo↑ disable the screen for 15 seconds. So,
00:00:34 - 00:00:39 - Aller à la vidéo↑ as you can see, I can just kind of touch
00:00:35 - 00:00:41 - Aller à la vidéo↑ it for a while and nothing will happen
00:00:38 - 00:00:43 - Aller à la vidéo↑ until 15 seconds elapses and then it
00:00:40 - 00:00:46 - Aller à la vidéo↑ will revert back to where it was before.
00:00:42 - 00:00:49 - Aller à la vidéo↑ So, the second button here is switch
00:00:45 - 00:00:52 - Aller à la vidéo↑ panel info. So, the switch panels are
00:00:48 - 00:00:53 - Aller à la vidéo↑ the other wireless switches that are
00:00:51 - 00:00:55 - Aller à la vidéo↑ located throughout the coach that
00:00:52 - 00:00:57 - Aller à la vidéo↑ control your other lights and water pump
00:00:54 - 00:01:00 - Aller à la vidéo↑ for the areas that they're in. So here
00:00:56 - 00:01:01 - Aller à la vidéo↑ it will show that there is an entry
00:00:59 - 00:01:05 - Aller à la vidéo↑ switch, a galley switch, a washroom
00:01:00 - 00:01:06 - Aller à la vidéo↑ switch, and a bedroom switch. So if one
00:01:04 - 00:01:08 - Aller à la vidéo↑ of your switches isn't functioning
00:01:05 - 00:01:11 - Aller à la vidéo↑ correctly, you would go to this screen
00:01:07 - 00:01:14 - Aller à la vidéo↑ and see if it is showing a green or red
00:01:10 - 00:01:14 - Aller à la vidéo↑ icon here for this little wireless
00:01:13 - 00:01:16 - Aller à la vidéo↑ symbol.
00:01:13 - 00:01:18 - Aller à la vidéo↑ Why would it turn red?
00:01:15 - 00:01:20 - Aller à la vidéo↑ So it will turn red if the battery dies
00:01:17 - 00:01:22 - Aller à la vidéo↑ in the switch or or just for some other
00:01:20 - 00:01:23 - Aller à la vidéo↑ reason that the switch becomes
00:01:21 - 00:01:24 - Aller à la vidéo↑ disconnected.
00:01:22 - 00:01:26 - Aller à la vidéo↑ How do you uh reconnect the switch or
00:01:23 - 00:01:29 - Aller à la vidéo↑ how do you pair it again? Say this
00:01:25 - 00:01:31 - Aller à la vidéo↑ becomes red. What you do is press and
00:01:28 - 00:01:34 - Aller à la vidéo↑ hold on the switch that you would like
00:01:30 - 00:01:36 - Aller à la vidéo↑ to pair for 5 seconds
00:01:33 - 00:01:38 - Aller à la vidéo↑ and it'll come up. It'll say wireless
00:01:35 - 00:01:40 - Aller à la vidéo↑ switch panel pairing procedure. So it'll
00:01:37 - 00:01:43 - Aller à la vidéo↑ all explain it here, but all you have to
00:01:39 - 00:01:45 - Aller à la vidéo↑ do is click start pairing and then you
00:01:42 - 00:01:47 - Aller à la vidéo↑ just go to the switch panel in question.
00:01:44 - 00:01:51 - Aller à la vidéo↑ So here I selected the galley. You would
00:01:46 - 00:01:51 - Aller à la vidéo↑ press any two buttons for 5 seconds
00:01:51 - 00:01:56 - Aller à la vidéo↑ and it'll show that the switch has
00:01:53 - 00:01:58 - Aller à la vidéo↑ paired successfully.
00:01:55 - 00:01:59 - Aller à la vidéo↑ Okay. So, Ryan, network diagnostics. How
00:01:57 - 00:01:59 - Aller à la vidéo↑ is that going to help us? What does that
00:01:58 - 00:02:01 - Aller à la vidéo↑ show?
00:01:58 - 00:02:04 - Aller à la vidéo↑ So, the network diagnostics, if you're
00:02:00 - 00:02:06 - Aller à la vidéo↑ having problems, you can head into here.
00:02:03 - 00:02:07 - Aller à la vidéo↑ And so, it shows the status of each of
00:02:05 - 00:02:10 - Aller à la vidéo↑ the modules that are connected. So, here
00:02:06 - 00:02:14 - Aller à la vidéo↑ is your 7-in color LCD. That's this
00:02:09 - 00:02:16 - Aller à la vidéo↑ display here. The G9 is the actual
00:02:13 - 00:02:18 - Aller à la vidéo↑ brains of the system, and that location
00:02:15 - 00:02:20 - Aller à la vidéo↑ will vary depending on your coach. And
00:02:17 - 00:02:23 - Aller à la vidéo↑ your aircon, that's what's controlling
00:02:19 - 00:02:25 - Aller à la vidéo↑ your air conditioner,
00:02:22 - 00:02:27 - Aller à la vidéo↑ as well as the outputs from the air con.
00:02:24 - 00:02:29 - Aller à la vidéo↑ So, heat pump, compressor, fan high, fan
00:02:26 - 00:02:31 - Aller à la vidéo↑ low, and your freeze sensor. So, here
00:02:28 - 00:02:34 - Aller à la vidéo↑ it'll show a little green dot indicating
00:02:30 - 00:02:36 - Aller à la vidéo↑ that they're working correctly. And so,
00:02:33 - 00:02:39 - Aller à la vidéo↑ here, if you click on this G9 button,
00:02:35 - 00:02:41 - Aller à la vidéo↑ here's all your G9 outputs and inputs.
00:02:38 - 00:02:44 - Aller à la vidéo↑ Again, if the light is green, it's
00:02:40 - 00:02:47 - Aller à la vidéo↑ working correctly and on. If the light
00:02:43 - 00:02:49 - Aller à la vidéo↑ is off, then it's just off. And if it's
00:02:46 - 00:02:51 - Aller à la vidéo↑ red, then there's an error present. And
00:02:48 - 00:02:54 - Aller à la vidéo↑ often just turning off and on the output
00:02:50 - 00:02:55 - Aller à la vidéo↑ will reset the error. If the error
00:02:53 - 00:02:57 - Aller à la vidéo↑ persists, then you'll need to call
00:02:54 - 00:02:58 - Aller à la vidéo↑ service. So, after network diagnostics,
00:02:56 - 00:03:00 - Aller à la vidéo↑ here again, we have our degrees Celsius
00:02:57 - 00:03:02 - Aller à la vidéo↑ and degrees Fahrenheit. You can choose
00:02:59 - 00:03:04 - Aller à la vidéo↑ whichever one you want. Whichever one's
00:03:01 - 00:03:06 - Aller à la vidéo↑ blue is the one that's active. Down
00:03:03 - 00:03:09 - Aller à la vidéo↑ here, it'll show your floor plan. So,
00:03:05 - 00:03:12 - Aller à la vidéo↑ right now, we're filming this in a 24
00:03:08 - 00:03:15 - Aller à la vidéo↑ MB. Up here is your screen brightness.
00:03:11 - 00:03:18 - Aller à la vidéo↑ So, this can change the brightness of
00:03:14 - 00:03:20 - Aller à la vidéo↑ the screen on here. You can also press
00:03:17 - 00:03:23 - Aller à la vidéo↑ this auto dimming button. And so then
00:03:19 - 00:03:26 - Aller à la vidéo↑ your screen will automatically dim based
00:03:22 - 00:03:27 - Aller à la vidéo↑ on the brightness of the area. So that
00:03:25 - 00:03:31 - Aller à la vidéo↑ when you're sleeping, it will actually
00:03:26 - 00:03:33 - Aller à la vidéo↑ be fully dimmed and asleep.
00:03:30 - 00:03:37 - Aller à la vidéo↑ And as well here you can set your time.
00:03:32 - 00:03:39 - Aller à la vidéo↑ So you just go up with hours or minutes.
00:03:36 - 00:03:42 - Aller à la vidéo↑ And you can change between a 24-hour
00:03:38 - 00:03:43 - Aller à la vidéo↑ clock or a 12-h hour clock. And right
00:03:41 - 00:03:46 - Aller à la vidéo↑ here at the bottom, you'll see something
00:03:42 - 00:03:48 - Aller à la vidéo↑ that says GUI version and logic
00:03:45 - 00:03:51 - Aller à la vidéo↑ controller version. So, if you do have
00:03:47 - 00:03:54 - Aller à la vidéo↑ to call into service either Firefly or E
00:03:50 - 00:03:56 - Aller à la vidéo↑ RV or Leisure Travel Vans, we might ask
00:03:53 - 00:03:57 - Aller à la vidéo↑ you for these numbers and this is where
00:03:55 - 00:03:59 - Aller à la vidéo↑ you would find them.
00:03:56 - 00:04:01 - Aller à la vidéo↑ So, Ryan, let's suppose I just installed
00:03:58 - 00:04:03 - Aller à la vidéo↑ an aftermarket satellite dish on the
00:04:00 - 00:04:03 - Aller à la vidéo↑ roof. How could I turn the power on for
00:04:02 - 00:04:06 - Aller à la vidéo↑ that?
00:04:02 - 00:04:08 - Aller à la vidéo↑ So, if you install a satellite dish, you
00:04:05 - 00:04:11 - Aller à la vidéo↑ go into your settings here. So, where it
00:04:07 - 00:04:15 - Aller à la vidéo↑ shows floor plan, you press and hold on
00:04:10 - 00:04:17 - Aller à la vidéo↑ that floor plan for about 10 seconds.
00:04:14 - 00:04:19 - Aller à la vidéo↑ And then there will be a warning here.
00:04:16 - 00:04:20 - Aller à la vidéo↑ And so here you could change the floor
00:04:18 - 00:04:22 - Aller à la vidéo↑ plan layout, which you won't want to do
00:04:20 - 00:04:24 - Aller à la vidéo↑ cuz you're not actually changing your
00:04:21 - 00:04:26 - Aller à la vidéo↑ floor plan. But here there's an out
00:04:23 - 00:04:28 - Aller à la vidéo↑ option here for your satellite power.
00:04:25 - 00:04:30 - Aller à la vidéo↑ You just press that and the little green
00:04:27 - 00:04:32 - Aller à la vidéo↑ light comes on. You hit confirm. And now
00:04:29 - 00:04:34 - Aller à la vidéo↑ if you go back to your homepage, you'll
00:04:31 - 00:04:38 - Aller à la vidéo↑ see that there's a satellite power
00:04:33 - 00:04:40 - Aller à la vidéo↑ button. So you just push that button and
00:04:38 - 00:04:43 - Aller à la vidéo↑ it comes on. That means your satellite
00:04:39 - 00:04:46 - Aller à la vidéo↑ has power.
00:04:42 - 00:04:46 - Aller à la vidéo↑ Yeah.
00:04:52 - 00:04:56 - Aller à la vidéo↑ Heat.