Use the Sani Flush system after you empty the black tank. Keep the macerator line or 3-inch dump line connected to a service-station dump or site sewer connection throughout the flush.
Flush the black tank

Confirm the black tank is empty. Dump it before you begin the Sani Flush.
Connect a dedicated garden hose. Attach it to the Sani Flush hookup.
Open the black tank handle.
Turn on the water supply. This sends water through the sprayers inside the tank and out through the connected dump line.
Flush for about 5 to 10 minutes. At a public dump station, keep the flush brief so you do not hold up other users. If you have a full-service site hookup, you can flush for 10 minutes.
Turn off the water supply. Let the macerator empty the tank, or let the 3-inch dump line run dry.
Finish draining and disconnect. Turn off the macerator if you used it, then disconnect the Sani Flush hose and dump line.
When to use Sani Flush
You can use Sani Flush each time you are at a dump station, or when you have a full-service hookup at your site. It may also help if you notice a problem with the tank sensors.






