Hi, I'm Brian from Leisure Travel Vans
and today we're going to be talking
about some of the special features found
in the Unity RL. So, in the bed area of
the RL, we've got the windows right
here, the top and bottom windows. There
is a day and night shades over here to
cover up the top blind in place. There
are day and night shades here to cover
up the windows for day and night use.
For the top window, they lock in place
there. For the bottom window, there is a
curtain right here that it will actually
snap into place. So, it's just got a
couple quick snaps. fold it open
and you can snap that in place here
and here and that'll cover up the bottom
window. So, there's also an escape
window here or an exit window. This exit
window is only for emergency use. So,
don't ever open it up for ventilation.
It's not intended for that purpose cuz
what can happen is if you do unlatch it
and if it goes open too far, it'll
actually become disconnected on the top
and you'll have to try to get it back in
place which can be very difficult. So,
the only thing you really need to do is
if you want to make sure that it
actually functions and then always lock
it back in place whenever you're done,
but don't use it for ventilation at all.
So, stored in the back here is the
cushion for the front table. So, it's
actually just snapped in place. So, I'll
just unsnap it back here.
There's that snap I was referring to.
So, this is the cushion that you're
going to be using in the front of the
coach when you want to make the bed in
the dinette. So, for electrical in the
back of the coach, what we have down at
the bottom over here, we've got some
inverted plugs right here, as well as on
the other side of the bed. There's also
USB outlets right here for charging
purpose as well. So, there's a set of
USB plugs here, as well as over there
next to the other electrical outlet. So,
to operate the chairs in the back of the
coach, they have a power footrest that
comes out. So, this power footrest is
operated off of 120 volt AC power. So,
you need to either be plugged into shore
power, running the generator, or have
the inverter turned on. So at at this
time we have the inverter turned on. So
what we'll do is we have the controls
here for the window chair and the center
chair. So it'll be the the window chair
and the center chair. So I'll just press
the button to bring the footrest out.
And you can see it coming out like that.
So just be aware that this is not a
storage area for anything because of the
mechanism. We want to make sure that
it's free and open for that mechanism to
come back in. And then very simply to
bring it back in, you just press the
other button to bring it back down.
Okay. So, what we're going to move on to
now is making the bed. So, in order to
make the bed, we're going to first of
all start by removing these cushions
that are going to be in the way for the
bed to come down. So, we'll pull these
cushions off. They're just held in place
by a little bit of Velcro.
So, there's the three back rest
cushions. Those are out of the way now.
There's also a long back rest cushion as
well along the the sidewall over there.
We'll move that one out of the way, too.
So now when the bed comes down, we're
going to want to make sure it has some
support at this end. So there's a flip
out leg right here. So we'll just grab
that, pull it out, and it locks in place
with this strut underneath here. So just
always make sure the strut is locked in
place when it's all the way up. So to
bring the bed down, it's also locked in
place right now. You can see it won't be
moving. So there's a release strap over
there. We'll have to make sure we pull
that release strap in order to bring the
bed down. Okay, so I've got the bed
released. Now I'm just going to lower it
all the way down.
Once it's all the way down, it will lock
in place again. You'll notice that it
won't come up all the way in order to
lift it back up. We That's when we need
to pull the strap again. And then the
bed will come back up.
So, when the bed is down, there's also a
little storage cubby right here. Inside
the storage cubby, there's actually
another set of USB plugs right there,
too, for charging purposes. So, what you
can do as well is you can leave your
sheets in place, and you can lock them
in place with this strap right here. So,
the strap just releases. You can leave
your sheets on, clip it back in place to
keep it in place while the bed is up.
Just be aware of how thick the things
are because as it comes up, there does
need to be some room behind it. So,
anytime you have thick pillows or a
really thick duvet or something, just be
aware of how thick that material is when
you're bringing the bed up. Also, be
aware of the the mechanisms over here.
Make sure you're not getting any of your
sheets or bedding stuck in the mechanism
here. So, when the bed comes up, you
don't get that pinched in there. So, to
bring the bed back up, it's locked in
place right now. So, we'll just pull
this strap. That'll release the lock. It
can come all the way back up.
When it's all the way up, give it a good
push to make sure it's locked in place
again. You can give it a little tug and
you notice that it won't come down
again. So, then you know it's locked in
place for travel. So, always make sure
it's locked in place for travel cuz you
don't want that coming down when if you
have to hit the brakes or anything. And
at this point, we can now drop this
support as well to release it. We'll
just put a little bit of pressure off by
lifting it. And then we'll push this
part up right here. And then the strut
can come back all the way down. Once
it's all the way down, it'll just lock
in place with a little click. Now, we're
ready to make up the lounge area again.
So, the dinette table can be placed
right in here in this mount here.
There's also a mount in the back of the
coach. The table itself is stored
underneath here in the passenger side
dinette seat. So, we'll pull that out.
And you can see [snorts]
the mechanism and the table are all
right there. The table leg for the front
is also stored in there as well. And
that table leg just drops right in place
right here.
So, the lagoon mount for the table can
also be mounted in the back right here
on the on the lounge.
So, we'll lift that cushion out of the
way and then we can slide this in place
into that dovetail.
And then we can use the handle right
here to lock it in place.
Back here, I've got a workstation. I've
got a table for dinner, eating,
entertaining, playing cards. I've got a
secondary TV back here. I've got another
soundbar back here with uh streaming
Bluetooth as well. So, for storing the
Lagoon mount, what you can actually do
is disassemble this piece here. We'll
pull that off. You can place that back
onto the table.
So, you can lock that down for storage.
But also there, this dovetail locks into
a dovetail right here on the table mount
as well. So, you can take this piece,
slide it into the dovetail,
and lock that in place for storage as
well. This part of the table leg will
have to swivel over to the corner just
so we don't want it sticking past the
table here. So, we'll just turn it over
to the corner and lock it in place
there. So, now we'll just slide the
table back into its storage area in the
passenger side dinette seat.
And we'll take the table leg from the
front and we'll place that inside here
as well.
So, the front dinette area can be
converted into a bed as well. Bring this
across
here. Very simple to do.
comes across. And then we're just going
to fill this in with cushions and make
it into a single bed. You drop your
tabletop into here and there's a filler
cushion that comes with the motor home.
It slides in here. And look at this. I
got a super single bed. And then we have
the optional air mattress that slide in
here and this becomes one big double bed
in case you have two extra guests. No
problem whatsoever. Okay, so here's our
optional air mattress on the Unity RL.
Two-piece air mattress. Comes with a
nice little bag. Comes with a 12vt air
pump. This is the center base section.
You're going to put that between the
driver passenger seats. Make sure your
chairs are up forward. And look at this.
You got a nice big bed area. Oh yeah, a
little siesta time. I like this. This is
comfortable. The optional air mattress
comes with a 12vt pump that can be used
to [music] both inflate and deflate the
mattress.