Hi, I'm Brian from Leisure Travel Vans
and today we're going to be talking
about the HDMI matrix. This is a
splitter box that is found in coaches
that have multiple TVs. And what this
does is it splits that signal from,
let's say, the DVD player. It's plugged
into this here and this will send the
signal to both of the TVs. The one in
the galley area up front and also the
one in the back by the bedroom or the
lounge area. So, in order to use the
HDMI matrix, what we're going to do is
first of all make sure it's turned on.
So, there's a switch right here that
will turn on. You'll see the lights
light up on there. And then we'll turn
on the DVD player. And after we have the
DVD player turned on, we'll also turn on
the TV.
So, once all three are turned on, now
the signal will be coming from the DVD
player. It'll be going into the HDMI
matrix and from there splitting off to
the TV. We can select which input is
going into there by this little display
right here. If you look at these
displays, it'll show an output B and an
output A. So A is going to be your front
TV. B is your rear TV. And if you want
to change which signal is being
displayed on that particular TV, we can
go to let's say out A for the front TV.
And we'll select this button right here.
here and you'll see that little LED
light change when it changes to the next
one. That's the next input on the back
of the HM matrix. So, let's say if you
have a satellite dish hooked up and
you've got your receiver in here, you
can hook that up to another input on the
back and now you're be changing it to,
let's say, input two. So, you'll go over
to A2. That means the front TV will now
be displaying the satellite dish.
Whereas, right now, output B, the rear
TV, is still on one. So, it's still
looking at the DVD player. If we wanted
the back TV to also display the
satellite dish, we would just press this
output button here, and it'll output
selection number two, which is again
going to be that satellite receiver. So,
one thing you want to remember whenever
you're using the HDMI on the TV, you're
always going to want to make sure you're
on HDMI 1. HDMI 1 is looking at this
matrix. So, you don't need to change
your TV to satellite because it's
already getting that signal from this
matrix. So, so long as you stay on HDMI
1 on the TV, it'll be looking at this
matrix. This matrix is what's going to
be swapping it from the DVD player to
the satellite receiver or any other
input that you might have. So, a couple
other little features that the HDMI
matrix has is this remote. This remote,
you can also change the different inputs
on there. So here again you have A1, A2,
A3, A4, as well as the B ones for the
rear TV. So again, you can watch those
little LEDs on there. And if I press the
A2, you'll see it change to the A2
output setting.
Another thing the HDMI Matrix has is a
couple sets of DIP switches here. These
dip switches can be changed for
different settings, but this is
something that I'd recommend leaving at
the factory presets that we have. If you
do want any more information on these
DIP switches, just see the owner's
manual for the HDMI matrix itself. So, I
have here a little sample HDMI matrix
just in my hands here just to show you
what this looks like a little bit in a
little bit more detail. So, again, I can
just turn it on like this. And again,
you'll see all those little LEDs light
up right there. That tells you which
inputs you're on. You again, you can
change it to the different inputs and
outputs. So, you can change it to the
different outputs. On the back of it,
this is what it looks like on the back.
You've got your your power input for it,
which is plugged into an AC outlet. So
again, you need to have your inverter
turned on or you need to be plugged into
shore power for this unit to operate.
But you've also got your input here,
here, and here, and here. So you've got
four inputs available to you. So
typically what we do is we'll have the
DVD player plugged into here, but you
can also hook up again your satellite
receiver right here, or again some other
inputs, whatever you might choose to
input. Your outputs right here. So
you're looking again at output A, output
B. These are your front TV, your rear
TV. So basically what this device is
doing is it's taking these signals in
and it's sending it out to the TVs. And
you can select this TV, you can select
each one of these inputs again just by
selecting those buttons on the front.
And just a word of caution as well, if
you ever do need to remove the HDMI
matrix, always be very cautious about
the HDMI cables on the back of it. these
HDMI cables. If you torque on this HDMI
matrix when you're removing it, there is
a chance that you could damage these
connections on the HDMI cable. So, just
always be aware that there is something
plugged into the back of that HDMI
matrix whenever you do want to remove
it. If you need to plug something else
into the back,