Hi, I'm Brian from Leisure Travel Vans.
So, today we're going to be talking a
little bit more on how to connect to the
Wine Guard 2.0 on that's located on top
of your coach. So, how do we connect
that to your device? What you're going
to find is a black plate like this. On
this black plate, there's going to be
two small buttons. They're going to be
quite hard to see, but one of them is
for the antenna booster, which is built
into the Wine Guard 2.0, but there's
also the Wi-Fi booster for the Weard
2.0. So, we're going to turn that on
first of all to get that thing to turn
on. It could take a couple minutes for
that to boot up. So, just give it maybe
2 to 5 minutes just to make sure that
it's actually fired up. So, what we'll
do first of all, we're going to navigate
to the settings screen on your phone. In
the settings screen, there's going to be
the Wi-Fi. So, we're going to click on
that. Once you're in the Wi-Fi, what
we'll do then is look for the one that
says Wine Guard. And it'll be the same
Wine Guard as what's listed on your
pamphlet here as well. So, you'll see
how those numbers, they actually line
up. Wine guard and the Wine Guard. So,
we'll click on that one. It'll gas for a
password. The password is also located
right here in the manual right there.
So, we're going to punch in this number
right now. So, once we've got the
password put into there, we're just
going to hit the join button, and this
will log into the Wi-Fi of the Weine
Guard 2.0. So, at this point, we're
hooked up to the Wi-Fi of the Weine
Guard 2.0 unit. This is not internet.
This is just the Wi-Fi signal produced
by the Wine Guard itself. So, what we
need to do is we need to get the Wine
Guard to log into an internet source and
boost that into your coach. And I've got
the app here. It's called the Connected
App. So, we're going to open that up.
Wait for that to load up. And what it's
going to ask you to do as well is it's
going to ask you to log into your
account. So, you may need to create an
account in order to use this app. So,
what we'll do is we'll just continue on
with this. We're going to create an
account and then we can move forward
with the app. So, after you set up your
Wine Guard account, you can go back into
the Wi-Fi settings and turn your Wi-Fi
on for the Wine Guard in your settings
on your device. Once you've done that,
go back into the app and it'll search
for the specific device. Once you find
it there, you can just click on that and
it'll open up the settings for that
specific wine guard. So, now that we're
into this device, what we're going to do
is we're going to click on the internet
source.
And it says select the internet source.
So, what we're going to do is we're
going to go through through Wi-Fi.
Accept that. We're just going to click
continue.
Next thing we're going to do is we're
going to scan for a Wi-Fi. So, we're
going to open that up. It's going to
start scanning for networks.
So now you have a selection of different
Wi-Fi sources. You can select the one
that you want to log into. Once you do
that, you'll enter the password.
Accept. And then we'll accept the
password. Now the Wine Guard unit itself
will try logging into that Wi-Fi. So as
the Wine Guard is doing this, it's
actually going to be turning itself off
and back on again. So just after you've
done this, make sure your phone is still
connected to the Weine Guard Wi-Fi
itself. At this point, you can see that
it is connected to the TFC shop guest.
This is our Wi-Fi source, which is also
hooked up to the internet. So, this is
our internet source. So, what the Wine
Guard is going to be doing right now,
it's going to be boosting that signal
inside our coach to give it a stronger,
more powerful signal. So, at this point,
you are connected to the internet
through the Wine Guard. So, what you can
do now is you can close this down, close
the app. You can use your phone as
normal, hooked up to the Wine Guard
Wi-Fi. You can also log in your Blu-ray
player or other devices like a laptop.
You can log that into the Weine Guard
Wi-Fi as well, and that will boost the
signal so you can have a good strong
internet signal inside your coach. As an
alternate way of hooking up to the Wine
Guard Wi-Fi, what we're going to do is
we're going to log in using the laptop.
So, what we're going to do is we're
going to search for the specific Wine
Guard Wi-Fi with the signal. So, you can
see here we have the SSID, the Wine
Guard, and a bunch of numbers and
letters. And so, that's the matching one
right there. So, we're going to select
that one. At that point, it's going to
ask you for a password. So, the password
is also on the manual right there.
there. Okay. So, now that we've got the
password entered, we're going to click
join.
And now it should hook up to the Wi-Fi
of the Weine Guard unit itself. So,
again, this does not give us internet
access yet. This is just giving us
access to the Weine Guard Wi-Fi itself.
So, now what we're going to do is we're
going to log into the unit using a web
browser. So, we'll go to the address tab
here, and what we're going to do is
we're going to punch in the following
sequence. So, we'll punch in 10.112.1
and then hit enter.
And at this point, it's going to ask you
for a username and password. So, factory
settings, the username is admin. The
password is also admin, no caps. And hit
continue.
Okay. So, at this point, we're going to
want to log into a a an internet source.
So, what we're going to do is we're
going to get the Wine Guard unit to scan
for Wi-Fi. So, we'll click on scan for
Wi-Fi
and it'll start scanning for a Wi-Fi
source that it can log into.
Okay. So, what we'll do today is we're
going to log into the E one here. It's a
public one. So, we're just going to
click on that one, hit continue. It'll
ask for the password. We'll enter the
password. Continue again. And we'll wait
for it to connect to that internet
source.
So now you can see that the Wine Guard
is now hooked up to a Wi-Fi signal which
in this case has an internet source. You
should now be able to log into the Wine
Guard with any of your devices. So at
this point now your Wine Guard is hooked
up to the internet source and you can
start surfing the web on your devices
just like you would normally. So always
refer to your owner's manual for your
Wine Guard 2.0 for other details on
connections and also for using other
devices. One thing you can do as well,
this will log into a Wi-Fi source like
what we've just done, but you can also
install a SIM card on the unit itself
located on the roof. So, in order to do
that, you'd remove the cover over top of
that port and you would install a SIM
card and log into that. So, that SIM
card can be used for different cellular
carriers as well as Wine Guard
themselves also have a data package that
can be purchased. So, let's say what
happens if you were to lose your
password or your your information for
this and you need to reset it to factory
settings. What you can do is on the unit
itself on the roof, there's actually a
reset button. You can press that in
order to reset the Wang Guard 2.0. So,
in order to reset it from inside, what
we're going to do with this power
button, you're going to turn the switch
on and then wait 90 seconds and then
turn it off. And you're going to repeat
that three consecutive times. On the
next power on, the system will begin a
reset. So, at this point, all the
changes will be lost that have been made
to the to the unit and they will return
to the factory default SSID and
password. So, if you don't have the
manual inside your coach, what you can
do is you can look on the unit itself.
So, there will be the SSID and password.
They will be listed underneath that
cover on the unit on the roof as well.
So, now we're on the top of the coach
right now and we're going to take a look
at the wine guard unit on the roof
itself. We'll have a paper clip. We'll
just bend it open like this. You'll also
need a Phillips screwdriver in order to
remove the cover behind here. We're
going to just remove these screws right
here in order to access them. In behind
there,
the cover will pop off just like that.
In behind that, you're going to find the
SIM card for the for the unit. So, you
just press that and you can pull that
SIM card right out. So, this is the SIM
card that comes with the Weine Guard
unit. So, this is directly from Weine
Guard. You can buy data for this as
well, or you can insert your own SIM
card from your own cellular carrier. So,
that SIM card will just get inserted
into the back of the unit right here.
We'll push it in and make sure it clicks
in place.
So, in the event you need to reset it to
factory settings, the reset can be found
right behind that clear plastic panel.
So, after we've removed that panel, what
we're going to do is we'll have a paper
clip. We'll just bend it open like this
so we can get into there. And in the top
left corner, you're going to see a small
hole. We're going to push the paper clip
into there.
So, when you push the paper clip into
there or some other small device, you're
going to feel a little switch in there.
So, we're just going to push that switch
in and we're going to hold that in for
30 seconds and that'll reset it back to
the factory settings. So, after you've
reset it to the factory settings, the
Wine Guard password and SSID are found
on this sticker right here behind that
clear plastic panel as well. So,
whenever you're done, just make sure you
screw the plastic panel back in place
because it does have a weather seal in
there. So, protect the inner workings
there. Make sure you put it back in
place. So, that concludes our look of
the Weine Guard 2.0. And of course,
always refer to the Wine Guard owners
manual for any other troubleshooting or
tips and tricks for the Wine Guard 2.0.