Hey, I'm Brian from Leisure Travel Vans
and today we're going to be looking at
the standard Leisure Lounge
configuration. So, we're going to
discuss a little bit how this can be set
up. This is the initial setup that we
have it in right now. This is kind of
like the sofa setup that we have it in.
So, we'll show you a couple different
ways that this can be set up. So, one of
the first things that we can do when
it's in this position like this, we can
drop this down
and turn around and you've got an
armrest or a cup holder that you can use
there. Okay. Another configuration that
we can do is put it into the Sha's
lounge. So, what we'll do is we'll lift
up this armrest here. That'll give us a
support for this back rest.
If you remove these two cushions,
now you have an area that you can use as
a Sha's lounge. From here, we're going
to convert this into a more of a theater
seating. So, we'll start off by pulling
out this center cushion.
We'll start by lifting up this table in
the middle here. Gives you a little spot
to put drinks or something. We can take
this back grass cushion. We'll move it
over this way. In order to drop this
down, we'll just lift it all the way up
and it'll drop down. And we'll take the
other back rest cushion and set that one
up here. These back rest cushions, they
can snap in place in case if you want to
want to prevent them from moving around.
And there you have the the theater style
seating. So to go in this case from the
theater seating over to dinette seating,
we'll lift up these back rest supports
again. We'll move these back rest
cushions over here.
And now you can drop the table down. So
the table has this lock here. We're
going to unlock it, lower it down, and
there you have your dinette seating. So
at the bottom of the dinette bases,
you'll see that there's a couple extra
storage areas down here. So it's all
open over on this side, as well as the
same thing on the other side, too.
So, for a little extra seating around
the dinette area, there's these dinets
they can actually pull out. So, this
will slide out. And then there's some
accessory cushions that can be
installed,
giving you a little extra seating, a
little more length in the in the seat.
So, you have extra seating for more
people. So, an additional configuration
for the theater seating. When you do
have it in that position,
then you can leave this in place as
well. So, if you have it in this
position, you can actually have a little
more leg room when you're sitting in the
theater seating mode. So, now what we'll
do is we'll make this into the bed. So,
we're going to just remove these back
rest cushions, get them out of the way.
We'll lower this accessory table.
We'll unlock the bed
and lower it down.
So, we'll leave these extensions out on
the dinette. That'll give us the extra
support. So, when you're in bed, it'll
help to support the bed. And you'll hear
it lock in place. So, now if we do want
to lift it back up, there is this
release handle right here. This needs to
be pulled in order to lift the bed back
up. But what we'll do now is we'll
unfold the mattress. So, it's got this
clip right here, the strap to hold it in
place.
And that folds the bed out to your full
length. At the head end of of the bed,
there's these headrests. These headrests
can actually come out a little bit. And
you notice that they click in different
angles like this. In order to bring it
back down, you need to come all the way
up and then it'll come back down. So,
you've got that adjustment
of where you want it for for leaning up
against.
At the top, there's also these reading
lights. To turn them on, just press the
center and they'll turn on. Okay. Okay.
So, just be aware also that when you do
fold the bed up, that this portion of
the bed does need to fold in.
So, the thickness here is important. You
don't want this to be too thick. So,
anything that you leave on here, any
bedding or anything that you do leave on
here, make sure it's not too thick that
you still have room for this to fold up.
Also, be aware that you remove anything
loose that's on here before you fold it
up because there's a chance then that
something could fall in behind the bed
and which will be a little bit difficult
to get out. So just be aware that the
bedding is not too thick and that you
remove all your loose articles that are
sitting on top of here still. You could
leave the pillows over on this ledge
here as well cuz as the bed folds up,
they should stay in place there. So they
should the pillows should be safe
sitting over there as well. When you do
fold up the bed in order to keep this
all in place and keep it secured, there
is a strap as well. You clip the strap
back in place and that should keep this
from falling off as well. So before you
fold your bed up, always make sure as
well that your windows are closed and
the reading lights are turned off as
well. Otherwise, you'll have to drop the
bed in order to close them and turn them
off. So, as a safety feature, when your
bed is made to prevent falling into the
stepwell area, there's a stepwell cover,
release the lock there. Lower it down,
and that gives you somewhere where you
can step on to for safety sake. So, now
when we want to lift the bed up, the bed
has a lock at the back. So, if I try to
lift it right now, it won't go up. If I
force it, I will damage something. But
there is a release strap right here.
Make sure you pull on this release
strap. that will release the locks in
the back and allow the bed to come back
up.
So, at these locks here, these locks,
they engage into these plastic blocks.
These plastic blocks are also angled to
act as a guide so that when the bed is
going up, that it actually helps to
center the bed and keep things stable
and locked in place. Whenever you do
have the bed up, make sure that these
are engaged, particularly when you're
traveling, just to make sure that the
bed doesn't come down while you're
driving down the road. So, on the side
of the armrest here, that's where you're
going to find a light switch for the
lights and also a USB plug if you need
to charge your iPhone or, you know, your
tablet.