Hi, I'm Brian from the Travel Vans and
today we're going to be looking at the
new Wonder RL Murphy bed. I'm going to
show you how it works. So, come on with
me and we'll take a look. So, first
thing we want to do, there's a travel
lock in the back corner there. There's a
sticker that indicates where that is.
We're going to make sure that's
disengaged before we try operating the
bed. So, travel lock is located right
here. It's disengaged. Now, next step we
want to do is we're going to pull these
cushions out of the way to make sure
they're not getting pinched in the bed.
Next, we've got this support right here.
It just pulls out. It's clipped in place
and it'll engage. There's a rod right
here that holds it in place. So, once we
have that up, so I'm going to bring the
bed down now.
and bring it all the way down until it's
all the way down and your bed is made.
So, with every mattress, there is a
mattress cover that's included with it
that goes on top of the mattress to
protect it. And there's also a strap
right here that you can use to keep your
bedding in place while the bed is
folding up. Okay. To bring the bed back
up, like I said, you can leave your
bedding in there using the strap to keep
it in place. And then you have to hit
this button.
Once the bed is fully up, you can lower
this. Again, there's a an arm right
here. Like I said, it just has a release
that you need to push up on it like
this, and then it can lower down. And
you'll notice that it'll clip in place.
So, when you are traveling down the
road, you want to you want to get going.
Make sure you have the travel lock
engaged. Otherwise, there's a chance
that there's going to be added pressure
on the bed. So just always engage that
travel lock whenever you're moving down
the road.
So in the back of the Wonder RL, there's
also a set of footrests that you can
pull out. So right underneath here,
underneath this skirt, there is a
footrest that pulls out and it can also
lift up like this to give you a bit of
an angle and a little added support. You
can even bring it in to make that
contour there a little more comfortable
in the back. To put it back in, move it
forward. Push it back down. And just
make sure that this skirt is out of the
way when you're bringing it back in.
So on this galley configuration, we have
a fold down counter extension as well.
So to fold that down, there's a catch up
on top here. You release that and then
fold that down and it'll sit flush with
the countertop. So on the Wonder RL,
you'll find a lot of the electrical
components found underneath the driver
dinette seat. To access those
components, you can remove the cushions
and you'll find some seat webbing. You
can actually look through the webbing to
see a lot of what's going on inside
there. Plus, the search protector
display is right here. So you can read
that. Inside here, you're going to find
things like the surge protector, the
transfer switch, the DC/DC charger, as
well as the breaker panels and and like
I say, quite a few other electrical
components. If you need to find
something, it more than likely will be
located inside here as far as the
electrical is concerned. Okay. On the
Wonder RL, it has a table base that's
mounted right here between the dinets.
The table is located underneath the
passenger dinette. There's a door that
opens up right here. This is where
you're going to find the table leg
as well as the lagoon mount that mounts
onto this table leg. So, that'll just go
on like this. You loosen off this
handle, slide that in place, and then
lock it down. The table is also stored
in here. If I pull that out, you can see
how it has that mount for the lagoon
mount that also just clips in or drops
in place right here. You can see how
it'll just drop in place like that. And
so this table,
you can also lock it in place here. Stop
it from turning this way. And another
lock over here to stop it from swiveing
that way. So again, you can loosen
everything off here.
Swivel it around. And you can also fold
these leaves out if you need a little
more room.
Just like that. So this lagoon mount can
be used up front here. And the same
table and setup with a lagoon mount can
be taken to the back of the coach. So if
we just take this lagoon mount off,
we'll head to the back. There's a mount
located right here on the in the back
area. So again, same as the front, we're
going to slide that down into that
dovetail.
And if you can't turn the handle, that's
what this button's for. If you press
this button, you can rotate the handle
and then start tightening it again. So
again, just as in the front, the table
drops right in place right there. And if
you find that the table is too high or
too low, that can be adjusted on the
dovetail mount that's mounted onto the
the lounge. In the back of the Wonder
RL, there's a set of two windows right
here. If you notice the top window, it
does have a blind that comes down to
cover that window, but this one's not
long enough to go all the way down. So,
there's also an auxiliary curtain that
can be installed.
It has a snap at this end and a snap at
this end. The bottom window has the
curtain to cover it up. And the top has
this blind
which slides behind these catches to
hold it in place. Okay. Underneath the
lounge in the back here, there's
actually some storage that you can
access as well. To get at that, remove
these two cushions. Again,
lift up from the front here. And you can
see there's a lot of extra storage there
for you.