So with this new Dumatic multiplex
system, if I need to change any
settings, where can I do that? How can
that be done? So as with anything,
there's a settings screen. So from here
in the settings screen, you'll find
numerous amounts of kind of background
settings which again we'll all preset at
the factory to what we would recommend.
But anyways, from here, so there's just
a general info tab. It's got a little
bit of legal legal information and a bit
of an about. If we ever need to you to
figure out the firmware version or
software version of your screen, say you
need an update, then you'd go into this
screen.
Um, what we'll talk a bit about later is
the mobile app. So, here's a few
settings just to help you get started
with that.
And here, if you have the optional
satellite dish, this is where you'd
power the optional satellite dish with
just the press of a button.
Um, as well as the default room. So, the
default room is kind of holds a few of
the buttons that you're be most used in
that room. So here you can change it
depending on what room the screen is in.
But again we have this preset at the
factory for which room it's actually in.
Um and the standby screen here you can
choose that. So right now it's set to
clock but you can edit that. So can have
it set to clock. You can have it dim
automatically or go to sleep. And so
that way the screen would go black and
all you'd have to do is just tap it and
it would wake it back up.
I'll just put it back to clock for here.
How long does it usually take for these
screens to go to sleep? 4 minutes. So,
heat mode here that is tied in with your
climate. So, here it says heat pump. So,
that means when you want to heat your
unit, it will automatically default to
the heat pump and it won't run on the
furnace. But you can change that. So,
you can edit this. So, you can have it
on either on auto so that way it will
use both the heat pump and the furnace.
and the furnace will only turn on if
your climate temperature is 5° or higher
than your current inside temperature. Or
you could have it just set to furnace so
it'll only run your furnace and say
you're in you're dry camping and you
don't want to be running your generator.
So then your furnace is a good option
just because that runs off of your 12vt
system. And your next setting here is
your temperature system. So you can
choose between either Fahrenheit or
Celsius.
your brightness mode. It can be either
automatic or manual, kind of like have
you have on your phone. So, if it's on
automatic, it will sense the ambient
light and will dim automatically. Or if
you have it switched to manual, you can
manually just set the brightness here to
whatever you want. Audio level. So,
that's just the level of audio of these
little clicks. So, if you want to turn
it off, you would just turn that all the
way down to zero.
your time format. That can be either
your 12 or 24-hour time format and your
inverter sleep enabled either on or off.
So that is the setting when you would
turn on your disconnect switch whether
you want your inverter to be on or off.
So if you have inverter sleep enabled
set to on, your inverter will be off by
default when you turn on your
disconnect. And if you have it off, then
your inverter will come on by default.
So then we should be able to use the
receptacles inside the coach to charge a
laptop.
Exactly.