So this screen will show you your
notifications. For example, if one of
your electronic fuses is blown. So for
here, we have blown the water pump fuse.
And so this notification will pop up and
you'll be able to see that. And then
you'll be able to go into the fuse page,
which we'll explain later, to clear that
or fix it. And so you go into your fuse.
And it also shows this little bell here.
It's a shortcut to the notification
screen. So as soon as you fix the fuse,
go back to the notifications, you can
clear it, and then you'll be good to go.
All right, Ryan. I've been camping for a
while, and now I'm wondering how full is
my fresh tank? how full is my black
tank?
So, for that you go to the tanks page.
So, here you can see your fresh, gray,
and black tank percentages, as well as
you can also monitor your propane uh
levels. And from here, you would also be
able to turn on your water pump. Ryan,
we're dry camping today. So, tell me
about how I get into my AGS system.
Okay, so your autogen start here and go
to the AGS page again. So, here you have
your autogen page. So, we'll go through
these step by or one step at a time
here. So, first you have your auto
charger. So, this is watching your
battery voltage. So, if your battery
voltage drops too low, then your
generator will kick in to charge up your
batteries.
Next, you have your quiet time start and
your quiet time end. So, say you're in a
campground that has strict limits on
what time you are and aren't allowed to
run your generator. That's where you
would set it here. We do preset it at
the factory to a fairly reasonable time
from, I believe, 10:00 p.m. to 8:00 a.m.
or possibly 9:00 p.m.
or possibly 9:00 p.m. as I'm looking now
for your start voltage. That would be
the voltage that you'd want to let your
batteries get down to before you'd want
your generator to kick in and start
charging them. And then as well, you
have a time under setting. So, right
now, it's set to zero minutes, but
that's just cuz we were playing around
here a little bit before. So say you
want it for 1 minute. So that means
it once your batteries are down to 12.2
volts for 1 minute and then your
generator would turn on to recharge your
batteries. So next you have your climate
AGS mode. This switch is used for when
you want to run your air conditioner or
your heat pump automatically with the
generator. So, you would set in your
climate screen, you'd set, say you want
it always at 72 and it gets a little bit
warm, then the air conditioner will
automatically request that the generator
start so that the air conditioner can
fire up. This would be good for pets or
anyone else that if you're just having a
nap and you just want to sleep and cool
and Yeah. Then also you have a generator
exerciser. So, some manufacturers
like generators to be run a certain
amount of time. So, you can set here
what uh how often you want your
generator to run, which days you want.
So, it goes Sunday, Monday, all the way
back to Saturday there.
So, you select which days, how long you
want your generator to run, and what
time you would want your generator to
start.