Hi, I'm Brian from the Travel Vans and
today I'm being joined by Ryan and we're
going to be discussing the new Dometic
Multiplex system.
Thanks, Brian. Yeah. So, I'm one of the
designers here and I helped integrate
this system into the new Unity RL and
we're going to kind of run through it
here and yeah, let's see how this goes.
Okay. So, Ryan, what can we do with this
panel? What does this do for us here?
So, what this panel can do is control
most items in your coach. So, that's
either the inverter, monitors the
batteries, monitors the water tanks, and
a whole slew of other things. And we'll
take a deeper dive into here.
Okay. So, Ryan, we have this screen
called up right now. Can you explain a
little bit what this screen is about?
Okay, so this screen is your clock
screen. So on your clock screen, I mean
obviously you have your clock here. Uh
you also have your date. You have your
inside and outside temperature as well.
It'll show the humidity right here at
the sensor and your uh coach battery
levels.
So this would be kind of considered your
home screen as you're using the the
unit.
Exactly. Yeah. To get into any of the
other areas that you might want to
change, you just hit this little these
three lines up here. You click on that
and then it'll bring you up another page
of areas that you can control in your
coach.
Okay. So, Ryan, is there just one panel
inside the coach?
No. So, for everyone's convenience, you
have one panel up here on the front
pillar. You'll have one at the entrance
so you can grab it from the outside and
control your lights while you're
standing from the outside. You have one
in the bathroom and then one in the rear
lounge. So, a total of four panels. And
in addition to that, you can connect
your phone to the system and then
control it from an app.
Okay. So, Ryan, now that we're in this
screen here, can you explain a little
bit what all this stuff does?
Okay. So, each of these are buttons that
would control the various aspects of
your RV. So, for example, we have the
climate, which would control all your
air conditioning and your furnace. Uh
the mechanical that would control your
uh ventilation fans in your bathroom and
your galley as well as your awning. And
then you have your lights that controls
all your lights and your dimming. The
power would let you turn on and off your
inverter as well as uh turn on and off
your generator. The notification screen
is if there are any error messages sent
over the multiplex system. They will
appear there. It will also show if any
of your electronic fuses that are
controlling the lights are blown. You
also have a tank screen. So that'll show
you the levels of your fresh gray and
black tanks as well as control your
water pump. The AGS screen is your
automatic generator start. So from
there, you can change the settings as to
whether you want it to do under voltage
or if you want it to come on when you
turn on your climate. And then your
fuses screen is your electronic fuses.
So that's for a lot of the lights in
here, the rope lighting, the galley
lighting, and everything else in
between. Uh your settings page, you'll
find a number of just general settings
for the screen. Your room screen is kind
of holds a few of the common buttons for
that area of the coach that you're in.
And then your clock screen was where we
were before. It has your time, your
date, and temperature and humidity.
Ryan, what is this here on the screen
right here? What are these indicating?
So, some of the one of these is will be
your speaker. So, you hear the little
clicking noises as well as you have a
little proximity sensor here. So, if you
choose in your settings to go into sleep
mode, after 4 minutes, the screen will
dim or darken and completely turn off.
And then if you just wave your hand in
front of it or come up close to it,
it'll come on automatically.