Okay. Standard on the Wonder, of course,
is a sixgallon LP hot water heater. Uh
12vt spark. Uh holds six gallons of hot
water. Of course, we got our pressure
release valve here. And then our drain
valve is right here for draining the hot
water heater. Optional, we have the
Truma Aquo Comfort Plus hot water
heater. So for draining the hot water
tank, this is the ano rod and the drain
area here. As you can see inside here is
the ano rod itself. So when it gets down
to that little stem, all of it is gone.
It's time to replace it. Very important.
And we use a 1 and 1/16 socket to uh
move it in and out.
Okay. Here we have the uh sixgallon uh
Suburban hot water heater. And uh
showing you the back of the valves for
the bypass. Right now these uh the blue
and the red up the red up top and the
blue here at the bottom. They are
closed. That's because we're bypassing
the water heater. In order to bypass the
water heater, this one with the red and
blue on it has to be in the open
position running with the water line.
And um that is when you're bypassing the
water heater. If you want to use the
water heater on the for normal flow,
then what you would have is you'd have
open this one, the red and the uh blue
and have the red and blue, the one in
the middle, you'd have that closed so
you don't bypass.
And that way your water doesn't mix when
you have this valve. This valve has to
be closed otherwise your hot and cold
will mix and you will not get hot water.
[music]