So on the Unity MBL, we've got a macerating toilet.
The Macerator toilet also has a module
that controls the flush functions on it.
So yes, it has a switch on the wall,
but that switch communicates with a a module.
That module in this case is gonna be located
underneath the shower here.
That module is located right here.
This is what actually controls the
flushing sequence of the toilet.
So this is the flush control switch
for the Dometic macerator toilet.
In this case, you'll see that this one has a fill button
here and a flush button there.
So if you just press this, it'll end up flushing the toilet.
This one is for filling the black tank when it starts
to get full, and you won't be able to flush the toilet,
and it'll actually show that on here,
the lights will turn red, indicating that the tank is full
and, and then the toilet won't flush anymore.
It has a low flush and a high flush setting.
So if you wanna use more water
or less water, when it refills that bowl,
it changes the setting from normal, which fills the bowl
after a flush and
or to back to dry flush where it won't fill it.
We're gonna press and hold that flush
button until you see it flush.
It's gonna take about five seconds now
that it's changing from a normal flush
to a dry bowl setting.
And you can revert by doing exactly the same thing.
So if you have any other questions about the toilet,
you can definitely find that in the owner's manual here.
And this is where you also see it.
It'll explain how to change the flush modes.
So this is where you're gonna see that it actually mentions
the normal flush mode.
It uses about 0.85 gallons on normal flush.
And if you're on a dry bowl setting,
it's 0.45 gallons per flush.